|
1989 Isuzu Rodeo - 4x2, Lowered, Manual, 150,000 Miles
|
nicholas
Owner:
Nicholas Carter
(Sydney,Austalia, NS)
Created: 8/10/2007
This is called a Holden Rodeo In AUS but you call it the Isuzu in the USA we started off just wanting to lower it a bit then after putting 18inch wheels on it, it brought it back up. so thats when some adjustments where started.From that point on we airbag it to start, then change the exhaust through the rear quater at the back,after that changed the tailamps which were purchased from USA.The door handles were removed, moving it half way up door glass support.A front Bumper Bar was hand formed out of 3mm Aluminium so was the grille just to be different.The intercooler has Flame shaped tanks to fit into the bar.A air scoop was moulded to the bonnet to let cool air in.Both Number Plates have been set on a angle as well as recessing the aerial and front guard flashers.Also 4 inches was welded completely around the lower half of the car so as not to let the chassic touch before the body,Drag Blocks were welded under the car. Rear section of chassic was c notched.
Main Photos (15 Photos)
8/17/2007 Views: 156 Comments: 1
|
|
8/17/2007 Views: 144 Comments: 1
|
|
|
8/15/2007 Views: 158 Comments: 1
|
|
|
|
|
|
|
|
Fabricating Grille and Bumper Bar all o...
8/13/2007 Views: 125
|
|
|
8/12/2007 Views: 146 Comments: 1
|
|
|
|
|
|
This project has been done over a period of years while still kept on the road as a every day use car.
Want to showcase your own ride at Mini Truck Zone? It's free and easy!

Note: If you find any questionable material that this user has uploaded to this page,
please contact us immediately.